1965 Belvedere II
A/FX Altered Wheelbase
426 HEMI Auto
Fabrication Moving the Front Wheels Forward 10 inches
Page 2

Once the rear of the car was buttoned up Billy moved to the front

The Front rails were cut off, Spot welds removed to ready the nose for the 10 inch altering.
 You see many that build an Altered Wheelbase simply install a straight axle and call it done.
Chrysler engineers stuck with the torsion bar front suspension.

They used Imperial Torsion Bars that
were extra long. Following the Chrysler build guide,
Billy mocked up the torsion front and welded it all together.

426 HEMI Engine and Trans Mock up- Page 3